1/2inch for Use with Impact Wrench Tools Or 1/2 Drive Scissor Jack Adaptor

Lift Your Jack Very Easy:

Made Of Very Solid Chrome Vanadium Steel,Easily use with your scissor jack,Suitable to most of loop type or double eyelet type scissor jacks in the marketif you are worry about its compatibilityplease check the oval’s size on your jacks

Easy to use with the following tools:

1) 1/2″ drive/impact drills/ratchet or standard drive sockets

2) 13/16″ lug wrench/tire iron or socket or easily add a half inch adapter to any drill

3) If you don’t have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2″ adapter and use any cordless or corded drill with this tool and those difficult scissor jacks

Specifications:

Material: Chrome Vanadium Steel(50BV30 Steel)

Exterior: Black oxide finish

Item Weight: 135 g(4.86 ounces)

Product Dimensions: 50.741.424 mm (2.0 x 1.63 x 0.95 inches)

Slot Size: 8.8 mm(0.35 inch) wide, 23.90 mm (0.94 inch) deep

Bolt Length: 4.1 cm (1.6 inches)

Bolt Dimensions: 0.97 mm

( enough to fit most of scissor jacks ,to ensure this ,you can check the oval’s size on your jacks)

Note:

1.If you don’t have a 1/2 inch hex or impact wrench,you can very easily get a standard drill bit to 1/2″ adapter and use any cordless or corded drill with this tool and those difficult scissor jacks

2.This adapter fits most of the scissor jacks in the market, including loop type(hole diameter>9.7 mm) or double eyelet type(hole diameter>9.7 mm, eyelet distance<16.5 mm)

3.There are rare cases some 1/2″ drives can’t fit this adapter,it is most likely the drive is not strict 1/2″,Pls change another drive or contact us to return it